Instrument Technician
Global Energy Ventures (UK) Limited
Abidjan, Cote d'Ivoire, Cote d'Ivoire
il y a 2j
source : Oil & Gas Job Search

Instrument Technician in Abidjan, Cote d'Ivoire, Cote d'Ivoire

Abidjan, Cote d'Ivoire, Cote d'Ivoire salary not specified Contract

1.0 KEY OBJECTIVES

  • Ensures the instrumentation equipment is maintained and in a safe working condition, operated within the design parameters.
  • Be able to solve instrumentation problems and handle the troubleshooting.
  • Must be quality conscious and deliver technically sound results without incident.
  • 2.0 principal accountabilities

  • Before intervention, controls the quality, quantity and location of spare parts received on board. Must refer to Instrument Supervisor if any problem arises with spare parts (quality, quantity, etc.).
  • Before intervention, prepares the tools, specific tools, materials, recovered the work procedure and Permit to Work from Instrument Supervisor.
  • Before the intervention, discusses with Instrument Supervisor about the activity in terms of safety, maintenance tasks, spare parts, technicians, execution time.
  • If it is required, the Instrumentation Technician must ask explanation, details or information to Instrument Supervisor to avoid any misunderstanding.

  • Before the intervention, reads and follows the maintenance procedures that relate to the job. Explain the activity to his / her shift (Tools Box meeting).
  • During the intervention, assures that the maintenance tasks mentioned in the maintenance procedure are performed on right way by the Instrumentation shift.
  • During the intervention, be capable to highlight any anomaly, failure, deviation and report directly to his / her Supervisor.
  • After intervention, assures all the tasks have been well performed.
  • After intervention, controls all the instrumentation elements have been well reassembled.
  • After intervention, in coordination with Production Department and Maintenance Supervisors (M / E), participates to restart the equipment or installation.
  • Participates at the commissioning of the new or modified installation.
  • Be able to establish a clear diagnostic on site, to report to his / her Supervisor and set up a corrective action.
  • Participates in the failure root cause investigation of equipment.
  • Develops and nurtures a culture of continuous improvement within the Instrumentation Department.
  • Participates in a coordinated Nationalisation and on the job training program.
  • 3.0 key authorities

  • Opens the daily Permit to Work related to Instrumentation activities.
  • Responsible to identify the inhibit required following the Permit to Work System.
  • Participates on the maintenance activities realised by external company (e.g. Yokogawa, Emerson / Fisher / Rosemount / Allan Bradley, etc.
  • on site related to Instrumentation department during their major visits for major interventions under the supervision of Instrument Supervisor.

  • Executes planned preventive and corrective maintenance routines as scheduled.
  • Be able to address the training needs for the Nationalisation program and others.
  • Controls the quality of the maintenance operation performed by his / her shift on site.
  • Ensures the Instrumentation workshop is clear, clean and tools are on dedicated place.
  • Prepares the time sheet and reports to his / her Supervisor.
  • 4.0 qualifications and experience

    4.1 Experience

    Proving experience on maintenance of Instrumentation equipment as :

  • Regulation system / pneumatic system / calibration of instrument device (metering system, flow regulator, temperature, pressure, level, Fire & Gas detector, Smoke detector, PAGA) / Interface Regulation / ICSS / PLC (IO cards, bus com, PCU) / Valve & Actuator technologies / HIPPS / Safety logic diagram / Inhibition procedure / NAVAIDS / Telecommunication.
  • Be able to understand, interpreted the different control parameters on HMI console / Local automation package.
  • Be able to understand the Process of Production (FPSO).
  • Previous experience in a similar role or leading an instrumentation team.
  • 4.2 Qualifications

  • Instrumentation Technician certificate.
  • 10 to 15 years' experience in Oil & Gas
  • Recognised expert : Installation, test, and repair Fire and Gas detection and Smoke Alarm systems, valves (SDV, ESDV, BDV, etc.).
  • Test, troubleshoot and maintain pneumatic process production safety systems and control devices.
  • Must be fully competent in the application and use of instrumentation device such as : Voltmeter, Amperemeter, Calculator, DC Generator, Current Generator, Hand Tube Bender.
  • Dismantle, reassemble, calibrate and test an Instrument device in function of the Process Parameter.
  • Skills to work with CMMS Maximo and MS office.
  • Physical aptitude to work on offshore environment.
  • Excellent command of the English language.
  • Job Reference INS-02 APPLY

    Share this job

    Postuler
    Mon email
    En cliquant sur « Continuer », je consens au traitement de mes données et à recevoir des alertes email, tel que détaillé dans la Politique de confidentialité de neuvoo. Je peux retirer mon consentement ou me désinscrire à tout moment.
    Continuer
    Formulaire de candidature